KittyCatS! Community Forum

Full Version: New Owner Needs Help!
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
My new born keeps "hiding" in my walls. The only way I can find him is by looking for his stats and then move him by moving his position. Is there anything I can do to prevent him from being able to walk through the walls?

Thanks in advance,

Luli
Make sure your walls are not phantom. If they are not phantom, set the range to a smaller number in the menu. Default is 10 so you may need to pull it down to 5 or below especially in a smaller room or home.
Also I have learned when the walls are to thin they go through it especially when they are running into it.
Making the walls way bigger helps as this is not always flattering to the home people tend to use invisable extra prims to make their walls thicker.
Also when you lower their range as Stormrunner suggested make sure the food is within their range or, I find this very convenient, use a foodserver and make sure all your cats on your parcel/ sim can eat from eat on either range.
If you cant make the walls thicker, make prims down by the floor and make them invisible. That way everything will look normal but the cats will not escape on you.
Thanks so much for the suggestions!


~Luli
(12-15-2011 11:44 PM)Rocky Balzibo Wrote: [ -> ]If you cant make the walls thicker, make prims down by the floor and make them invisible. That way everything will look normal but the cats will not escape on you.

The invisible prims did the trick!

Thanks again,

~Luli
Reference URL's